What's Included?

• WSRD x JRR M130 Motec PNP Kit
• WSRD x JRR M130 Wideband Kit
• WSRD M130 Big Wheel Tune Calibrations
• WSRD Green Turbocharger
• WSRD Green Turbo Install Kit
• WSRD Terminator Wastegate
• WSRD Ski-Doo Intercooler
• WSRD Big Injector Set
• (3) WSRD Injector Adapter Harnesses

WSRD Install Kit: (What's Included?)

• (1) WSRD Billet Coolant Fitting & Mounting Bolt
• (2) OEM BRP Coolant Line O-Rings
• (1) WSRD Ski-Doo Oil Drain Fitting
• (1) WSRD Oil Drain Gasket
• (2) OEM BRP Oil Feed Fitting Crush Washers
• WSRD Coolant Line & Fitting Kit (Pictured - (4) AN Fittings, (1) Coolant Line Heat Sleeve, and (4) Oetiker Clamps)
• (1) Oetiker Clamp Tool

Power Production:

• 91 Octane: 230 Crank Horsepower
• 93 Octane: 240 Crank Horsepower
• 91/Race Gas (Mix): 269 Crank Horsepower
• 98+ Octane - Race Gas: 274 Crank Horsepower

Boost Pressure & Crack Pressure:

• 91 Octane: 19 PSI | Crack Pressure: 10 PSI
• 93 Octane: 20 PSI | Crack Pressure: 10 PSI
• 91/Race Gas (Mix): 26 PSI | Crack Pressure: 12 PSI
• 98+ Octane - Race Gas: 28 PSI | Crack Pressure: 14 PSI

Not adjusting your crack pressure can result in underboost/overboost code scenarios. The WSRD Terminator Wastegate is not configured before shipping. After the supplied WSRD Terminator Wastegate is installed the crack pressure adjustment procedure will be REQUIRED. Please review the "WSRD Turbocharger Overview & Crack Pressure How-To Video | Can-Am X3" under the "WSRD Install Instructions" Tab found in our main menu or click the following link: https://www.youtube.com/watch?v=cpfTjqZohSY